Products

The NVT 1613 is a 16 port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. “Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).

The NVT 1613S is a compact 16-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) cable. The unparalleled interference rejection ability of the 1613S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent.

The NVT NV–1662 is a 16-channel active (amplified) distribution amplifier device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC using Category-5 or better. The 16-channel distribution amplifier hub features dual outputs/channel for large high-density applications.

The NVT 1672 is an 16-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, wiring polarity, ground loops, and voltage transients, independent of video signal content.

The NVT 16PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 16 cameras, all over UTP wire. At the camera, Power, Video and Data connections are made using the 216A-PV (power-video only) or the 218A-PVD transceiver via an RJ45 connector and a single 4-pair cable.

The NVT 16-channel 16PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. The Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel (10 Amps aggregate). Use with NVT’s 216A-PVor 218A-PVD for cable runs under 750ft (225m).

The NVT 208A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. An improvement over NVT’s popular 213A video transceiver, the 208A-M features a Screwless UTP terminal block and Male BNC allowing connection directly to the camera or DVR.

The NVT 213A Video Transceivers are passive (non-amplified) devices that allow the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.

The NVT 213A-M Video Transceivers are passive (non-amplified) devices that allow the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.

The NVT 214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Lifetime warranty

The NVT 216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The 216A-PV incorporates the transceiver engine of NVT’s popular 213A video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive 216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT’s PVDTM product line.

The NVT 218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

The NVT 226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

The NVT 314A Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

The NVT 3213 is a 32 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Lifetime warranty.