Fire Alarm

The Altronix AL1002ULADA is an extremely cost effective 10 amp voltage regulated remote power supply/battery charger. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. Enclosure: 15.5 x 12 x 4.5

The Altronix AL1002ULADAJ is an extremely cost effective 10 amp voltage regulated remote power supply/battery charger. It may be connected to any 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. Red enclosure 18h x 14.5w x 4.625d

The Altronix AL1042ULADA is an extremely cost effective 10 amp voltage regulated remote NAC Power Extender. It may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and will provide auxiliary power to support system accessories. The unit delivers regulated and filtered 24 or 12 volt power via up to eight (8) Class B, four (4) Class A or combination of Class B and Class A Notification Appliance Circuits. Additionally, the unit can supply up to 1 amp from continuous AUX output and up to 1 amp from AC disconnected AUX output.. UL Listed fire (UL 864, UL 1481) MEA/CSFM/FM approved. Red enclosure 18h x 14.5w x 4.625d.

The Altronix AL602ULADA is an extremely cost effective 6.5 amp voltage regulated remote power supply/battery charger. It may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories. The unit delivers regulated and filtered 24 or 12 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). An individual output of 4 amp is achieved by paralleling 2 outputs. In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided.

The Altronix AL642ULADA NAC power extender - 24VDC or 12VDC @ 6.5 amp. four (4) class a or four (4) class b nac circuits. operates 2-wire horn/strobes. generates system sensor, gentex, faraday and amseco sync protocols. two - 1 amp aux. output. ul listed fire (ul 864, ul 1481) mea/csfm/fm approved. red enclosure 18 h x 14.5w x 4.625d

nac power extender - 24VDC or 12VDC @ 8 amp. two (2) class a or four (4) class b nac circuits. operates 2-wire horn/strobes. generates system sensor, gentex, faraday and amseco sync protocols. 1 amp aux. output. ul listed fire (ul 864, ul 1481) mea/csfm/fm approved. red enclosure 15.5 h x 12 W x 4.5 d

same features as al802ulada in larger enclosure 18 h x 14.5 W x 4.625 d.

nac power extender - 24VDC or 12VDC @ 8 amp. four (4) class a or four (4) class b nac circuits. operates 2-wire horn/strobes. generates system sensor, gentex, faraday and amseco sync protocols. two - 1 amp aux. output. ul listed fire (ul 864, ul 1481) mea/csfm/fm approved. red enclosure 18 h x 14.5 w x 4.625 d