Fire Modules

The Amseco SMD10-3A Sync Module is designed to provide a synchronized temporal pattern (code 3) tone, and synchronize the strobe fl ashes when used with Amsecos Select-A-Strobe, Select-A-Horn, and Select-A-Horn/Strobe series as well as the ability to silence the horn while maintaining the strobe flashes

The Potter ARM-9008 is an auxiliary relay module that provides 8 form C relays that are independently configurable. Each relay is independently configurable to any input within the fire alarm system. The ARM9008 directly connects to the chassis of the PFC9000 series fire alarm control panel. Each relay is rated for 1 amp at 28 VDC

The Potter DLA-254P provides an additional two loops to the base panel of the PFC-9000 series Analog/Addressable fire alarm control panel for a total of 381 addressable points. The panel with the DLA254P will support up to 381 sensors, modules or combination thereof. The DLA-254P mounts directly in the main chassis of the PFC-9000

The Potter DRM module provides independent control of two Form C contacts while utilizing one SLC (Signaling Line Circuit) address. The DRM module has a highly configurable programming algorithm that allows the user to set up groups of devices (zoning) for simultaneous operation of multiple DRM modules. Each module has 16 priority states that are programmed to generate modulation patterns. The operating parameters are maintained by the module and do not require individual communication with the control panel during the emergency condition to operate

The Potter FRCM Fast Response Contact Monitoring Modules are designed to be used with pull stations, water flow switches, and other applications requiring the monitoring of dry contact alarm initiating devices

The Potter FRCM Fast Response Contact Monitoring Modules are designed to be used with pull stations, water flow switches, and other applications requiring the monitoring of dry contact alarm initiating devices

The Potter IDC-9004 Notification Card provides four additional notification circuits to the PFC-9000 series FACP. The IDC-9004 can be wired either Class A (Style Z) or Class B (Style Y) and still provide four circuits. Each circuit is individually configurable as a strobe or signal circuit with the option to make the zone silenceable (deactivateable). Each circuit can provide a maximum of 1.7 amps, however the panel cannot provide more than 10 amps total

The Potter PSCI is a short circuit isolation module that can be used for either Class A or Class B wiring configurations

The Potter SLA-127P expands to the base panel of the PFC-9000 series Analog/Addressable fire alarm control panel for a total of 254 addressable points. The addition of the SLA-127P will support up to 254 sensors, modules or combination thereof. The SLA-127P mounts directly in the main chassis of the PFC-9000 FACP

The Potter SOM-4 Supervised Output Module has been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes, including supporting multi-zone operations, and/or functions, up to 16 different modulation patterns and multi-state programming